User Contributed                                           MET/CAL PROCEDURE
=============================================================================
INSTRUMENT:            Cyber-Systems FC: Function Control Module
DATE:                  05-Mar-96
AUTHOR:                User Contributed
REVISION:              0
ADJUSTMENT THRESHOLD:  80%
NUMBER OF TESTS:       11
NUMBER OF LINES:       164
CONFIGURATION:         Datron 1281
CONFIGURATION:         HP 5335A
=============================================================================
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  ASK-                        P J                          A
  1.002  ASK+                                          X
  1.003  HEAD         ÍÍ INITIAL CONDITIONS ÍÍ
  1.004  DISP         Set the UUT front panel controls as follows:
  1.004  DISP         ACTIVE/DISABLE switch .............. ACTIVE
  1.004  DISP         TOTAL/PRESET switch ................ PRESET
  1.004  DISP         A/B switch ......................... A
  1.004  DISP         INTERNAL/EXTERNAL FUNCTION switch .. INTERNAL
  1.004  DISP         INTERNAL SOFT START/STOP ........... OFF (down)
  1.005  DISP         Set the UUT front panel controls as follows:
  1.005  DISP         MULTIPLIER ......................... X10
  1.005  DISP         FREQUENCY .......................... 10
  1.005  DISP         MASTER SPAN ........................ MAX
  1.006  HEAD         {}
  1.007  HEAD         {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»}
  1.008  HEAD         {º +10 REF CALIBRATION º}
  1.009  HEAD         {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ}
  1.010  HEAD         {}ÍÍ +10 REF CALIBRATION ÍÍ
  1.011  JMP          2.001
  1.012  EVAL
  2.001  DISP         Apply power to the main frame.  Use the UUT CURSOR and
  2.001  DISP         INCREM switches to set the display to 00000000.
  2.002  DISP         Connect the UUT AMPLITUDE BNC connector to the 1281
  2.002  DISP         VOLTS INPUT.
  2.003  IEEE         [@1281] DCV AUTO
  2.004  IEEE         [@1281] RDG?[D2000][I]
  2.005  MATH         MEM1 =  10
  2.006  MEME
  2.007  MEMC         V              0.004U
  2.008         IEEE  [@1281] DCV AUTO
  2.009         DISP  Adjust R3 for a 1281 reading of 10.000V.
  2.010         JMP   2.003
  3.001  DISP         Disconnect the test set-up.
  3.002  HEAD         {}
  3.003  HEAD         {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»}
  3.004  HEAD         {º FREQUENCY CALIBRATION º}
  3.005  HEAD         {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ}
  3.006  HEAD         {}ÍÍ FREQUENCY CALIBRATION ÍÍ
  3.007  JMP          4.001
  3.008  EVAL
  4.001  DISP         Set the main frame power to the off position.
  4.002  DISP         Connect a "chip-clip" to UUT U16. Connect the 5335A
  4.002  DISP         input HI to U16 pin 12 and the counter LO to the
  4.002  DISP         UUT chassis (GND).
  4.003  DISP         Set the main frame power to the on position.
  4.004  IEEE         [@5335] [TERM LF]
  4.005  IEEE         [@5335] IN[D2000];
  4.006  IEEE         [@5335] FN1,AU1,AX1;
  4.007  IEEE         [@5335] [D2000][I]
  4.008  MATH         MEM1 = 360
  4.009  MEM/         1000
  4.010  MEME
  4.011  MEMC         kH             1.00U
  4.012         IEEE  [@5335] FN1,AU1,AX1;
  4.013         DISP  Adjust R19 for a 5335A reading of 360.00kHz.
  4.014         JMP   4.007
  5.001  DISP         Disconnect the test set-up.
  5.002  DISP         Set the main frame power to the off position.
  5.003  HEAD         {}
  5.004  HEAD         {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»}
  5.005  HEAD         {º OUTPUT REFERENCE DAC CALIBRATION º}
  5.006  HEAD         {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ}
  5.007  HEAD         {}ÍÍ OUTPUT REFERENCE DAC CALIBRATION ÍÍ
  5.008  JMP          6.001
  5.009  EVAL
  6.001  DISP         Connect a "chip-clip" to UUT U20.
  6.002  DISP         Connect the 1281 to the UUT as follows:
  6.002  DISP
  6.002  DISP         INPUT HI .................... U20 pin 11
  6.002  DISP         INPUT LO .................... top side of R13
  6.003  DISP         Set the main frame power to the on position.
  6.004  IEEE         [@1281] DCV AUTO
  6.005  IEEE         [@1281] RDG?[I]
  6.006  MATH         MEM1 = 0
  6.007  MEME
  6.008  MEMC         V              0.001U
  6.009         IEEE  [@1281] DCV AUTO
  6.010         DISP  Adjust R15 for a 1281 reading of 0.000V.
  6.011         JMP   6.004
  7.001  DISP         Press and hold UUT RUN/PAUSE button for 5 seconds.
  7.002  IEEE         [@1281] DCV AUTO
  7.003  IEEE         [@1281] RDG?[I]
  7.004  MATH         MEM1 =  10
  7.005  MEME
  7.006  MEMC         V              0.001U
  7.007         IEEE  [@1281] DCV AUTO
  7.008         DISP  Adjust R11 for a 1281 reading of 10.000V.
  7.009         JMP
  8.001  DISP         Disconnect the test set-up.
  8.002  DISP         Set the main frame power to the off position.
  8.003  DISP         Disconnect test leads and "chip-clips" from UUT.
  8.004  HEAD         {}
  8.005  HEAD         {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»}
  8.006  HEAD         {º COUNTER ACCURACY TEST º}
  8.007  HEAD         {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ}
  8.008  HEAD         {}ÍÍ COUNTER ACCURACY TEST ÍÍ
  8.009  JMP          9.001
  8.010  EVAL
  9.001  DISP         Connect the left most FG OUTPUT to 5335A INPUT A.
  9.002  DISP         Set the main frame power to the on position.
  9.003  DISP         Use the UUT CURSOR and INCREM switiches to set the
  9.003  DISP         display to 00100000.
  9.004  DISP         Set switch to TOTAL position and momentarily press
  9.004  DISP         and release the RESET pushbutton.
  9.005  IEEE         [@5335] [TERM LF]
  9.006  IEEE         [@5335] IN[D2000];
  9.007  IEEE         [@5335] FN3,AF1;
  9.008  IEEE         [@5335] GM3,CY3;[D3000]
  9.008  IEEE         [@5335] GO;
  9.009  DISP         Press UUT RUN/PAUSE button (button should lite).
  9.010  HEAD         [27][91]7m[27][91]5mPlease Wait ......... Long gate time
  9.011  IEEE         [D30000][D30000][D30000][D30000][D30000][D30000]
  9.011  IEEE         [D30000][D30000][D30000][D30000][D30000][D30000]
  9.011  IEEE         [D30000][D30000][D30000][D30000][D30000][D30000]
  9.011  IEEE         [D30000][D30000][D30000][D30000][D30000][D30000]
  9.011  IEEE         [D30000][D30000][D30000][D30000][D30000][D30000]
  9.011  IEEE         [D30000][D30000][D30000][D20000]
  9.012  HEAD         ÍÍ COUNTER ACCURACY TEST ÍÍ
  9.013  IEEE         [@5335][I]
  9.014  MATH         MEM1 = 100000
  9.015  MEME
  9.016  MEMC         ÿcounts        1U            counterÿA
 10.001  DISP         Set the UUT front panel controls as follows:
 10.001  DISP
 10.001  DISP         A/B switch. . .     B
 10.002  DISP         Use the UUT CURSOR and INCREM switiches to set the
 10.002  DISP         display to 00100000.
 10.003  DISP         Set switch to TOTAL position and momentarily press
 10.003  DISP         and release the RESET pushbutton.
 10.004  IEEE         [@5335] [TERM LF]
 10.005  IEEE         [@5335] IN[D2000];
 10.006  IEEE         [@5335] FN3,AF1;
 10.007  IEEE         [@5335] GM3,CY3;[D3000]
 10.007  IEEE         [@5335] GO;
 10.008  DISP         Press UUT RUN/PAUSE button (button should lite).
 10.009  HEAD         [27][91]7m[27][91]5mPlease Wait ......... Long gate time
 10.010  IEEE         [D30000][D30000][D30000][D30000][D30000][D30000]
 10.010  IEEE         [D30000][D30000][D30000][D30000][D30000][D30000]
 10.010  IEEE         [D30000][D30000][D30000][D30000][D30000][D30000]
 10.010  IEEE         [D30000][D30000][D30000][D30000][D30000][D30000]
 10.010  IEEE         [D30000][D30000][D30000][D30000][D30000][D30000]
 10.010  IEEE         [D30000][D30000][D30000][D20000]
 10.011  HEAD         ÍÍ COUNTER ACCURACY TEST ÍÍ
 10.012  IEEE         [@5335][I]
 10.013  MATH         MEM1 = 100000
 10.014  MEME
 10.015  MEMC         ÿcounts        1U            counterÿB
 11.001  DISP         {ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»}
 11.001  DISP         {º THIS COMPLETES THE VERIFICATION º}
 11.001  DISP         {ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ}
 11.002  END